How to install your house numbers and address plates

1. Assemble your template using the double-sided adhesive on the back.
2. Place the self-adhesive level in the place provided on the template.
3. Mark the holes on the wall using the template and a pencil.
4. Drill the holes with a 1/4" drill bit and remove the dust.
5. Screw the threaded rods to the back without tightening too tightly.
6. Add silicone along the entire length of the threaded rods.
7. Install your address by inserting the rods into the holes.

The installation of the Contemporary, Contemporary Large and Prestige models is quick and easy. These floating house numbers attach using rods on the back to create a stylish and durable 3D effect. This method is suitable for several types of surfaces, such as brick, wood, concrete or stone.

All you need is a drill. No specialized tools required.

• Positioning template
• 1/4-inch all-purpose drill bit
• Silicone 10 gr
• Sticker Level
• Mini marker

1. Place the self-adhesive level in the place provided on the template.
2. Mark the holes on the wall using the template.
3. Drill the holes with a 1/4" drill bit and remove the dust.
4. Add silicone along the entire length of the threaded rods.
5. Install your address by inserting the rods into the holes.

The installation of the Contemporary, Contemporary Large and Prestige models is quick and easy. These floating house numbers attach using rods on the back to create a stylish and durable 3D effect. This method is suitable for several types of surfaces, such as brick, wood, concrete or stone.

All you need is a drill. No specialized tools required.

• Positioning template
• 1/4-inch all-purpose drill bit
• Silicone 10 gr
• Sticker Level
• Mini marker

Method 1 — Installation with drilling

1. Assemble your template using the double-sided adhesive on the back.
2. Place the self-adhesive level in the place provided on the template.
3. Mark the holes on the wall using the template and a pencil.
4. Drill the holes with a 1/4" drill bit and remove the dust.
5. Screw the threaded rods to the back without tightening too tightly.
6. Add silicone to the first half of the threaded rods.
7. Install your address by inserting the rods into the holes without pushing them all the way through
8. Hold in place with adhesive for 24 hours, then remove the adhesive

Method 2 — Spacer Installation

1. Place the self-adhesive level in the place provided on the template.
2. Mark the holes on the wall using the template.
3. Drill the holes with a 1/4" drill bit and remove the dust.
4. Screw the threaded rods to the back without tightening too tightly.
5. Add a spacer using 1/4" vinyl pipe to the rods.
6. Add silicone after the spacer.
7. Install your address, then hold in place with adhesive for 24 hours.
8. Remove adhesive after drying.

Spacers are not included. You can use a 1/4" vinyl pipe available at the hardware store or choose our aluminum spacers for an even simpler and more uniform installation.

For siding such as vinyl or aluminum, which leaves a void at the back and offers little mounting surface, a suitable installation method is recommended. Two methods are possible depending on your installation.

• Positioning template
• 1/4-inch all-purpose drill bit
• Silicone 10 gr
• Sticker Level
• Mini marker

1. Screw the magnets into the spacers on the back of the numerals.
2. Position your numbers directly on the metal surface.

We suggest removing the numbers once a season in order to clean the surface and remove any dust that may accumulate.

Magnetic numerals are designed for steel surfaces such as doors, garage doors or some metal cladding. This option allows for quick, tool-free installation without drilling.

• Your numbers
• The magnets needed for each digit

1. Place the self-adhesive level in the place provided.
2. Mark the 3 holes on the wall with a pencil.
3. Drill holes if necessary according to your sidind.
4. Screw the screws directly into the wall or into the anchors.
5. Install your mailbox

The installation of your mailbox is quick and adapts to the majority of exterior cladding. Depending on your surface, you can screw directly into the wall or use anchors to ensure a secure fixing.

• Sticker Level
• 1/4-inch all-purpose drill bit
• Screws and anchors
• Mini marker

Linea Halo

1. Insert the level into the aluminum bar.
2. Mark the 3 holes on the wall.
3. Drill the holes and provide a central hole for the electrical wire.
4. Pass the wire for the 24V power supply and install the transformer near an outlet.
5. Screw the aluminum bar to the wall and adjust with the spacers if necessary. Check the level before securely attaching.
6. Position your numbers and letters to determine the spacing. Measure the gaps, cut the plastic rod and insert the spacers.
7. Make the electrical connections. Install the black bar and end caps.

Linea

1. Insert the level into the aluminum bar.
2. Mark the 3 holes on the wall.
3. Drill the holes (if your sidind requires anchors, use the provided drill bit). Install anchors if necessary
4. Screw the aluminum bar to the wall and adjust with the spacers if necessary. Check the level before securely attaching.
5. Position your numbers and letters to determine the spacing. Measure the gaps, cut the plastic rod and insert the spacers.
6. Install the black bar and end caps

The Linea model offers an elegant solution to display your address, with the option of opting for a illuminated or non-illuminated version. You get the same clean design, while choosing the level of functionality that suits your project.

• Aluminum extrusion
• Black extrusion
• Custom numbers and letters
• Plastic rod for spacers
• 1/4-inch all-purpose drill bit
• Screws and anchors
• Mini marker
• Level
• Connectors (illuminated version only)
• Transformer (illuminated version only)
• Electrical wires (light version only)

1. Assemble the templates using an adhesive.
2. Screw the rods to the back of the numbers.
3. Position the numbers and check the level. Mark the holes on the sidind using the template.
4. Drill holes using a 1/4-inch drill bit.
5. Add silicone to the rods.
6. Install the numbers by inserting them into the holes.

The Bungalow model is designed for simple and accessible installation. Available at hardware stores, it is ideal for residential projects carried out with tools already available at home.

Its slimmer design blends well with bungalow-style homes and urban environments.

• Figures
• Threaded rods
• Positioning template

1. Clean and dry the surface of the tank
2. Position the sticker with the transfer film
3. Press firmly to ensure grip
4. Carefully remove the transfer film

A simple solution to harmonize your bin with your civic address. Stickers allow you to clearly identify your bin while creating a visual ensemble that is consistent with your façade. They install easily on a clean, smooth surface, without tools, for a clean, long-lasting result.

Personalized sticker with transfer film